Tag: circuit breakers - page 4

Tips & Tricks in Electrical Component Refurbishment

There can be a lot of money stored up in old equipment or machinery which is why many businesses are now partnering up with waste management companies to help them retain as much of their investment as possible.  Old buildings or buildings destroyed by natural disasters can still contain valuable materials which can be recovered and sold to either offset some of the cost of demolition or go towards the cost of refurbishment.

There are heaps of hidden electrical and industrial resources in every building to be reused or sold.  It’s important to take inventory and catalog all salvageable equipment and materials from a demolition or refurbishment project. For instance, lighting fixtures can be reused, and wiring and electrical switches can be sold.

An industrial electric recovery process should consist of three main stages. The first phase involves identifying all usable or saleable assets. The second involves identifying those materials which will be reused for other projects, and the final step is to sell the materials for which your business has no further use.

Buildings that went up a few decades ago had to comply with safety standards that were a lot less stringent than the ones in place today. Experts in electrical surplus recovery will ensure that everything that is salvageable is recovered in the safest manner possible, and make sure it is disposed of according to state regulations.

Electric surplus recovery may involve some destruction, but it also means you will recover some assets, be able to recycle valuable components and sell everything you can no longer use.  It’s important to use the best contractors you can find for the job as they will pay for themselves many times over by discovering everything that is recoverable, complete the job safely, and get you the best returns.

Learn more about J & P Electrical Company and their vast line of new, surplus, and refurbished industrial electrical components including: circuit breakers, bus ducts, bus plugs, disconnects, fuses, panel switches, tap boxes, and transformers at www.jpelectricalcompany.com.  To contact one of our product reconditioning specialists call 877.844.5514 today.

 

The Benefits of Buying Refurbished Industrial Electrical Components

There are many types of refurbished industrial electrical components which include breaker panels, line switches, bus ducts, bus plugs, fuses, transformers, circuit boards, etc. and they are all durable, affordable and readily available for purchase.

It will amaze you to know that many individuals and businesses can benefit from buying refurbished industrial electrical components instead of purchasing new components or replacing equipment. The term “refurbished” is just used to explain that the equipment has been used and completely redone back to new again. A great deal of satisfaction has been seen by the users of refurbished electrical products because it helps them save up considerable amount of money.

Possibly the biggest benefits of buying refurbished industrial electrical equipments could be seen from the affordability to business owners and individuals equally. Regardless of the task, whether a home appliance repair or industrial-grade breakdown, it is advisable to seek quality refurbished electrical components at affordable prices. Regardless of the electrical problem you are facing the same rules are applicable; seek quality components and equipment at affordable rates.

Suppliers of industrial refurbished components are a common and reliable source of replacement components for manufacturing equipment for many years now. Many buyers choose to buy these types of products from them because they know that they are high quality, affordability and availability of alternatives.

High Quality: Perhaps a part might look new but that doesn’t guarantee that you will get a high quality component. Refurbished components undergo several rigorous overhauling processes and they are always tested to reach and sometimes surpass companies UL certification.

Affordability: Most people are searching for inexpensive electrical components to buy that will serve the purpose and not put a hole in their pocket. Brand new products may perhaps seem perfect but considering the cost and lifespan many buyers will choose to go for refurbished components.

Availability:  This is among the reasons why the sale of refurbished electrical components increased greatly in the past few years. Industrial products are always manufactured to serve longer purpose. Sometimes it is hard to see suppliers who have new components in stock for older products. It is very expensive if you choose to always upgrade a large equipment and sometimes needless as the lifespan of the equipment is far from getting to its peak. Refurbished electrical components are available in clutch as soon as you notice that new parts are out of date.

Alternatives: Whenever any equipment becomes faulty the company loses money. Nobody wants to be in the process of production and unable to repair faulty electrical equipments. Using refurbished components creates variety of alternatives for you at anytime within the refurbished electrical component company. Several refurbished components dealer will have them available or help you in finding the component you really want at an affordable cost with instant availability.

Both companies and individual save money and time when they buy quality refurbished industrial electrical components.

Learn more about J & P Electrical Company and their vast line of new, surplus, and refurbished industrial electrical components including: circuit breakers, bus ducts, bus plugs, disconnects, fuses, panel switches, tap boxes, and transformers at www.jpelectricalcompany.com.  To contact one of our product reconditioning specialists call 877.844.5514 today.

 

 

 

Using Bus Ducts and Bus Plugs in Manufacturing

When it comes to the electrical power distribution, a bus duct usually behaves inside a switchboard, dissemination board, and substation. These are normally utilized as a part of the business and industrial setting for inside and outside the establishment. The installation of bus plugs and bus ducts needs to be handled by experts to ensure that the high voltage manufacturing equipment runs on can be handled. A little numbness or wrong installation may bring about instant demise to the safety of the workers running the machinery. Below you will find some basic tips which can truly help guide you through the process of having bus ducts installed within your work environment.

In numerous industries and business offices, bus ducts are introduced in the downstream of the transformer which safeguards them from fault. It is important to remember that where you put the bus plugs and bus ducts must be completely sheltered and secure. You have to protect the equipment from rust and some other unsafe substance.

Bus plugs are basically an electrical attachment similar to an electrical outlet that you would see around your home.  The difference is that in manufacturing these systems need to move about to provide electricity to equipment in different areas of the building at different times.  Each bus plug will be associated with a specific area of bus ducts.  This bolsters power down to whatever it is beneath that should be powered, from lighting frameworks to hardware, whatever the case might be. The colossal advantage of the bus plugs are their ease of adaptability. Since there is no corporal hard cabling to the building, the whole framework can be detached and adjusted to accommodate the arrangement of floor. As new gear comes on the web or plant layouts moved, there’s no doubt about how precisely power will be hurry to the new area.

Utilize stainless steel bus ducts and rust proof equipment to increase the safety of bus ducts installed within the establishment.  Utilizing stainless bus duct and rust proof equipment helps to guarantee safety to the workers, the equipment, and the facility on a whole.

Bus ducts should never be settled permanently on the wall.  Bus ducts require attention to this matter.  If left to settle on a wall or floor the apparatus may not function as it should causing inconveniences to the work environment.  It is important that the quality of the products you use to power your machinery matches the quality of the equipment.  Never compromise on quality materials when installing bus ducts and bus plugs.  It is a huge mistake that often occurs in manufacturing facilities; keep this in mind when choosing what to install and what equipment to use within your facility.

At all times professional assistance should be given to the installation and usage of these systems. The fittings are not as stress-free as you may think; nothing is superior to professional help that is highly knowledgeable in this particular field and guarantee the security of work environment.

Learn more about J & P Electrical Company and their vast line of new, surplus, and refurbished industrial electrical components including: circuit breakers, bus ducts, bus plugs, disconnects, fuses, panel switches, tap boxes, and transformers at www.jpelectricalcompany.com.  To contact one of our product reconditioning specialists call 877.844.5514 today.

How Circuit Breakers Can Save Your Home In A Flood

Would you know what to do or where to begin if you found that your home was in danger of flooding?  Many homeowners don’t think about flooding or believe that the probability that a flood will affect them is slim.  The truth of the matter is that floods have become one of the most common natural hazards to affect homeowners throughout the United States.  Localized flooding, from events such as water freezing and thawing, can affect smaller contained areas such as neighborhoods or smaller communities.  General flooding can occur from events such as constant rain or torrential downpours which can flood entire water systems throughout multiple states.

Flooding is a common occurrence.  They can occur no matter where you live but are more common if you live in low-lying areas, near water or downstream from a dam.  Concern yourself with flooding if your home is located by small streams, gullies, creeks, culverts, dry streambeds or low-lying dry ground that appear harmless.  If you find that a flood is imminent there are a few things that homeowners can do to prepare.

Electricity and water mixed together are a deadly combination.   The possibility of electrocution during a flood is high.  In order to prevent this from occurring homeowners should turn off and unplug all electrical appliances, utilities and components powered using electricity.  Homeowners should locate the homes circuit breaker and shut off the main breakers.  This will shut the electricity off throughout the entire home.  Never touch any electrical appliance or electrical component when you are wet or if you are standing in water.  Do not risk electrocution.  Even if the electrical power is shut off if an appliance is not unplugged it can still contain a power current that can cause harm.

Never walk through water that is moving.  The current in just six inches of moving water can cause homeowners to fall.  Locate an area where the water is not moving.  Use something long and firm to test the ground in front of you before you step.  In a flood your homes floors can become weak which can lead to a collapse.

Flood water is always contaminated.  Once flood water has entered your home the area is then contaminated as well.  Homeowners must clean and disinfect everything.  Electrical appliances should never be reconnected even after they have been clean and disinfected until water is no longer present.  Appliances and main electrical supplies should also be inspected by professional electricians before the homes power supply is re-established through the circuit breaker.

Flooding can affect anyone, anywhere at any time.  Homeowners should be prepared if flood conditions exist and should know what to do to protect themselves and their families.

J&P Electrical is a full service electrical equipment company.  At J&P, we supply contractors, end users and supply houses with new surplus, quality reconditioned and obsolete electrical equipment. Contact us today at https://jpelectricalcompany.com for all of your bus plug, circuit breaker, switchboard, fuses, disconnects and more.

The Purpose of Circuit Breakers

Many people know that their homes have a circuit breaker but aren’t familiar with what they do or why they are important.  All of the electrical power that is supplied to your home is controlled by your homes circuit breaker.  They are used to control the flow of electricity throughout your home.  This one unit can turn the electrical power on and off within the home.  If you are experiencing an electrical surge, your homes circuit breaker will automatically cut the power supply to ensure that no major damage occurs.  This is referred to as tripping the breaker.  This can occur throughout the entire home or in just areas where a surge is experienced.

If the wires in your electrical system are unable to carry the load of electricity properly a surge has occurred.  When this happens the breaker is unable to perform properly and shuts down. The breaker will then need to be reset.  The breaker will keep tripping if the circuit continues to be over capacity.  If this occurs often your circuit breaker is not meeting the electrical capacity you require.  This signals to you, the homeowner, that it is time to upgrade your circuit breaker.

Often times the system can be upgraded by improving the capacity of the circuit breaker by adding an additional panel to the main panel.  You first must check all of the electrical components and wiring to isolate and identify the area that is not being sufficiently powered.  If it is found that there are power supply issues throughout the board it may be time to upgrade all together.  This is a common issue found in many older homes.

Electrical appliances both small and large have changed a great deal throughout the years in regards to how much electricity they require.  With this change many older homes are finding that an additional panel added on to the current circuit breaker is only a temporary fix to a much larger problem that exists.  Sometimes it is possible to get by in these situations by decreasing the amount of electricity needed throughout the home at any given time.  For instance, if the television is on in the living room and dinner is going in the oven it may trip the breaker if you decide you also want to blow dry your hair in the bathroom.

Larger homes require more electricity as well.  When you are considering any major home improvement upgrades such as an addition, upgraded kitchen or bathroom it is important to check the capacity on your current circuit breaker to ensure that you will not be taxing the supply of power.  If you find that you are switching from gas appliances to electrical appliances you may find the current circuit unable to power them without upgrading.

The circuit breaker in your home plays a huge role in protecting your family.  Without this electrical component shutting down overloaded circuits we would find an increase in electrical fires.  Overloaded systems will overheat which will cause wires to split and fires to occur.  This is why it is so important to have a basic understanding of what your homes circuit breaker does for you and to recognize the signs that it is not functioning properly.

All homeowners should know where their circuit breaker box is located, how to cut the power to not only the entire home at once but also to specific locations as well as how to change fuses contained within.  These are the basics that homeowners can handle without calling in an electrician.  It is however recommended that a certified electrician manage any additions or upgrades if you do find that the homes electrical demand is overloading the current circuits supply.

J&P Electrical is a full service electrical equipment company.  At J&P, we supply contractors, end users and supply houses with new surplus, quality reconditioned and obsolete electrical equipment. Contact us today at https://jpelectricalcompany.com for all of your bus plug, circuit breaker, switchboard, fuses, disconnects and more.

Understanding Residential and Commercial Electrical Components

One mystery that stumps many of us is the usage of fuses in electrical components residentially and commercially.  Most of the confusion surrounds the voltage, Watts, ratings and labels.  Below we will look at fuses in greater detail to offer guidelines on working out the correct fuse for every situation.

What is a Fuse?

Fuses are used in electrical appliance, automobiles, homes and businesses.  They are designed to prevent a flow of current that is higher than the value of the fuse.  One example of this is if you choose a 3A fuse; any current flow exceeding 3A will cause a surge and the fuse will “blow”.  The fuse keeps too much electricity from flowing into the equipment which would result in some type of failure such as a fire or explosion.

Any excess in current flowing through a circuit is prevented from going any further with the use of fuses.  The main purpose of fuses is to prevent melting or fire from occurring under fault conditions.  A fault condition is where a higher current value attempts to move through and the fuse disallows any extra current from flowing through.

The fuses value is dependent upon the power needed to allow the equipment to run properly.  An appliance, such as a heater, is higher powered, requiring more current and thus larger fuses with a cable that is capable of carrying it.

Molded Main Plugs

Sometimes, as within molded main plugs, the cable is molded to the plug.  The fuse is fitted within the molded plug. The fuse value is marked on the outside of the plug which makes checking the fuse very easy.  In order to check out the fuse you lever it out and check to ensure the value is the same as what is marked on the plug.

Rewireable Main Plugs

Rewireable main plugs are ones in which the user can wire on their own.  These plugs can handle a variety of currents and are marked to represent this.  Even if a cable says it can handle a 13A fuse does not mean it should be used on your appliance.  Make sure the fuse you choose matches the appliances maximum voltage not that of the cable.

Watts Verse Fuse Ratings

There is a simple calculation to determine the current amps taken by an appliance.  Divide the power in watts by the mains voltage to work out the needed amps.  For example, a 1900 watt divided by 230 voltages is equivalent to an 8.3 amp rating.  This allows you to decide between a 3A, 5A or 13A fuse.  You can obviously see that 3A and 5A will be too small for an 8.3A rating. You will need to choose a larger fuse such as a 13A.

To choose a cable with enough capacity to carry the current check the diameter of the cable.  A cable of 7.5mm or more is likely to be rated for 13A or greater.  Be careful to note that a 3A or 5A fuse should not be changed just because the cables rating is 13A however a 13A fuse should only be paired with a 13A cable not a lower rated cable.

J&P Electrical is a full service electrical equipment company.  At J&P, we supply contractors, end users and supply houses with new surplus, quality reconditioned and obsolete electrical equipment. Contact us today at https://jpelectricalcompany.com for all of your bus plug, circuit breaker, switchboard, fuses, disconnects and more.

Popularity In Choosing Reconditioned Manufacturing Parts and Equipment

There are so many reasons to consider buying used reconditioned electrical equipment to replace or repair equipment within your manufacturing facility.  Feeling confident when purchasing refurbished and reconditioned electrical supplies is simple; the market demands high quality equipment and that is what you can expect out of electrical equipment that has been reconditioned.

There are many reasons why the popularity of equipment and supplies that have been reconditioned has risen.  In this article we will explain how price, availability, warranties and quality testing help to create a positive return on your investment when purchasing and using reconditioned electrical equipment over new surplus.

Price: On average a company can save anywhere from fifty to seventy five percent on the cost of electrical equipment when buying reconditioned equipment over the cost of new surplus.  Over time this savings can really add up for your company.  Why not save money where you can especially when there is very little difference between purchasing new over reconditioned electrical equipment.

Availability: The availability of reconditioned products over new is a huge benefit when it comes to making a purchase.  New inventory, equipment and replacement parts, often take a substantial amount of time to come in.  Most manufactures do not keep inventory in stock of a wide selection of new equipment. Lead times to order these products can take anywhere from a week to several months.  This is not conducive to fixing an issue right now.  Used reconditioned equipment can be in hand as fast as it takes the product to ship.  Electrical supply companies tend to stock an abundance of reconditioned electrical equipment so that when an issue arises they can ship the product directly to you minimizing additional down time for your business.

Warranty:  Another benefit of purchasing reconditioned electrical equipment is the warranty that is issued.  Reputable companies will offer a one year warranty on all reconditioned electrical supply purchases.  This is equivalent to what most manufactures offer on new surplus.

Quality: The standards when purchasing equipment that has been reconditioned is fairly stringent.  Electrical parts are fully disassembled.  From there each and every part is cleaned and thoroughly inspected.  Parts are then painted, reassembled and tested.  Products are tested to ensure that they are as close to new as possible.  Each product must meet or exceed the manufacturers UL certification.  Voltage withstands all tests from one phase to another to the ground.

When equipment is not longer manufactured you may not have a choice other than to purchase reconditioned parts.  This is something that occurs frequently as technology changes.  Components are reconditioned to ensure that your manufacturing equipment doesn’t also become obsolete when parts fail.  Equipment is an expense that most business owners don’t want to make until they have exhausted all other options.  Another major benefit in when it comes to the reconditioned electrical component market.

J&P Electrical is a full service electrical equipment company.  At J&P, we supply contractors, end users and supply houses with new surplus, quality reconditioned and obsolete electrical equipment. Contact us today at https://jpelectricalcompany.com for all of your bus plug, circuit breaker, switchboard, fuses, disconnects and more.

The Growing Popularity Of Reconditioned Electrical Components

To many people the idea of purchasing something that is used is not something that they would normally consider.  Most people just prefer to purchase new.  The luxury of buying new isn’t always available in business.   This is especially true when discussing electrical equipment and parts.  There are many reasons that you may have to resign yourself to purchase products that are up-cycled.

One main reason that a reconditioned product may be preferable over new surplus, especially when it come to electrical supplies is price.  Reconditioned products, as will other up-cycled goods, can cost from anywhere between fifty to seventy five percent less than a new one.  In industrial applications where you are continually replacing, repairing and maintaining equipment the savings with reconditioned products can really add up.

Another reason that reconditioned surplus is so popular in industrial applications is because of the products availability.  New surplus, especially on older pieces of equipment can be difficult to locate.  If you need to replace a component time because a sensitive component to the equation a two week turn around for a new part is just not feasible.  Reconditioned parts are often in stock for even obsolete electrical equipment making downtime equivalent to shipping and installation times.

It is also important to note the varying definitions of the term reconditioned, recycled, refurbished and up-cycled.  When speaking about electrical parts and machinery, especially in manufacturing the terms reconditioned and refurbished mean that a part has been used.  Electrical surplus companies purchase these used products and recondition them to sell as “new”.   The part is brought in completely disassembled, cleaned, inspected, replaced if needed, painted, out back together and tested.  Only if the product passes the highest quality standards in testing will the product be offered for sale.  Reputable electrical companies will offer a one year warranty with sales on reconditioned electrical components. This is the same warranty that is offered on new electrical parts as well.

In other industries these words have other meanings.  Sometimes manufacturers will call a product that is overstocked and no longer being produced by the manufacturer used or reconditioned.  Sometimes a part that’s package has been damaged in shipping will be discounted or offered as refurbished even though the product itself has not been damaged and is perfect working order.  A product that has been used as a display model or comes with a cosmetic defect a product can also be marketed as reconditioned or refurbished.  This means to you as a consumer that a product of like new quality being sold as a discounted price.

Saving money where you can is important in today’s tight economy.  This not only relates to residential consumers but industrial consumers as well.  This is why, although many people prefer to buy new products and supplies many are leading to reconditioned or refurbished supplies to keep their homes and businesses running.

J&P Electrical is a full service electrical equipment company.  At J&P, we supply contractors, end users and supply houses with new surplus, quality reconditioned and obsolete electrical equipment. Contact us today at https://jpelectricalcompany.com for all of your bus plug, circuit breaker, switchboard, fuses, disconnects and more.

Reducing Electronic Waste

The environment is something that is important to each and every one of us.  In commercial settings, electronic waste is abundant.  Reducing this waste is something that has become an important priority in these settings.  Professional companies handle e-waste disposal and will come in and recycle or refurbish your used electrical components and equipment.

There are several simple ways to reduce the electronic waste that is put out by our companies and create a positive impact on the environment we live in.

Maintain and Preserve Instead of Change

Newer isn’t always better.  Many times we change equipment when it is unnecessary just because a new model has been introduced not when it is actually beneficial to the needs of the company.  Yes, technology is progressing and we like to keep it up to date so that we don’t fall behind within our industries; another way to do just that is with software upgrades.  When components fail you can replace them in order to maintain older equipment.

A simple example of this can be found by looking at home appliances.  When the refrigerator stops chilling food we don’t automatically look to purchase a new one.  Most of us hire an appliance repair company to evaluate the issue and quote us the cost to replace and repair the issue.  This happens to be less expensive nine times out of ten and reduces the environmental footprint we leave behind.

Choose to Recycle

Electronic waste is more toxic than other types and harder to break down.  When you throw away electrical components, lap tops, mobile phones, computers or computer parts you are negatively affecting the environment. Think about the amount of electronic waste that you alone create and multiple that over and over again.  Proper e-waste disposal needs to become a priority.  Many companies will properly dispose of and recycle electronic waste.  Most offer services where they will pick up the old hardware so that you don’t even have to be bothered at all.

Purchase Refurbished, Reconditioned or Repurposed Equipment

When a product is refurbished it means it has been taken back by the manufacturer and the defect has been repaired and rigorously tested.  Then they are sold at a discounted price because they are no longer in their original, factory package.  This doesn’t make them lower quality products.

Similarly, reconditioned products are components that have been used and repaired back to “new” to be sold again.  Reconditioned electrical components are popular within manufacturing and industry settings for their cost savings and ability to perform the same way a new product does at a steep discount.  Reconditioned components are taken apart, repaired, put back together and tested to ensure their reliability.

Repurposed equipment is taking something that once used for one project and using it for something new.  For instance, if a desk top has been used in the front office but is no longer keeping up with the demands of that department it is repurposed in an area that requires less out of it, perhaps as a machine that’s sole purpose is to create labels.  Repurposing instead of replacing is a great way to save money as well.

J&P Electrical is a full service electrical equipment company.  At J&P, we supply contractors, end users and supply houses with new surplus, quality reconditioned and obsolete electrical equipment. Contact us today at https://jpelectricalcompany.com for all of your bus plug, circuit breaker, switchboard, fuses, disconnects and more.

Selecting Reconditioned Electrical Components

There are times when we are all looking to save a little money but don’t want to sacrifice on quality.  This dilemma is what surrounds many of us in our everyday lives including at work, especially in industrial settings.  In an industrial or commercial setting you aren’t only looking to save money on the parts to ensure the machines run efficiently but you are also looking for parts that are accessible and can be brought in quickly to reduce downtime.  This is where refurbished and reconditioned electrical components come into play.  Many times companies find original parts difficult to find for out of date machinery.

Purchasing reconditioned components allow older machines to run longer without the expense of replacement. The question is how does a service manager in an industrial setting go about finding a reputable company to purchase reconditioned electrical components from?  What should they look for when purchasing refurbished components and will the purchased part be as reliable as purchasing a new electrical component?

The first detail that you should examine when looking to develop a relationship with a supplier of refurbished components is what type of warranty is offered.  Never purchase a reconditioned part without a warranty.  Reputable suppliers will offer a warranty on their products.  Warranties differ from company to company.  Establish a relationship with an electrical component distributor and work out the details of your account.  One of these may be establishing a warranty specific to your needs. You will never know what can be contracted until you ask.

Check into the cost savings with refurbished components.  Check out the price of the reconditioned component verse the cost of a new electrical product.  The price of the refurbished electrical product will be lower than a new part. What you must decide is the price difference worth the associated risks of purchasing an electrical product that has been refurbished.

If you are still unsure about purchasing reconditioned electrical products consider talking with someone from the company to discuss their reconditioning process.  Understanding the process in which each product under goes as it is reconditioned may make you feel less timid to consider purchasing refurbished components.  It is crucial that the company fixes the initial defect and that the product functions as well as a new one will.  As a consumer you need to understand that the scuffs and dents that cover the outside are not an important part of the refurbishing process.  Ignore the outside and concern yourself with what is happening inside that will save you money and run your electrical equipment.

Saving money is one of the top priorities of any company.  Being smart about it is crucial to avoid losses from an unnecessary downtime.  One way this can be accomplished is by purchasing quality refurbished electrical products from a reputable reconditioning company.  Most electrical companies sell both new and refurbished electrical products to ensure that downtime is minimal for their customers.

J&P Electrical is a full service electrical equipment company.  At J&P, we supply contractors, end users and supply houses with new surplus, quality reconditioned and obsolete electrical equipment. Contact us today at https://jpelectricalcompany.com for all of your bus plug, circuit breaker, switchboard, fuses, disconnects and more.